Tag: Mcu

The NXP has recently introduced RW612, a tri-radio wireless MCU integrating Wi-Fi 6, Bluetooth Low Energy (LE) 5.4, and 802.15.4 radios. Powered by a 260 MHz Arm Cortex-M33 core with TrustZone-M, it includes 1.2 MB of SRAM and a high-bandwidth Quad SPI interface with secure decryption...

NXP has recently announced NXP i.MX RT700 RT700 AI crossover MCU is designed for devices that require high-performance sensing, DSP, and computing capabilities while maintaining low-power characteristics for longer battery life. The MCU features two ARM cortex-M33 cores clocked at...

The Infineon EZ-USB FX20 is a next-generation USB peripheral controller engineered for high-speed applications, delivering an impressive performance of up to 20 Gbps. Building on the legacy of the EZ-USB FX3, which has been pivotal in fields such as machine learning, machine vision...

Microchip has recently released the PIC32MZ-W1 Wi-Fi MCU along with 20 other wifi SoCs including link controllers, network controllers, and plug-and-play modules. The most important one among them is the PIC32MZ-W1 wireless MCU because of its 32-bit MIPS M-class core running at up to...

A Hardware Bug in the RP2350 microcontroller family causes GPIO pins to get stuck at around 2.15V when configured as inputs with internal pull-down resistors. This "latching" behavior is due to a faulty fault-tolerant pad design from an unnamed IP vendor. The issue affects all GPIO...

Makerdiary has recently released the iMX  RT1011 Nano Kit, a small and low-power development board built around the NXP iMX RT1011 crossover MCU featuring an Arm Cortex-M7 core running at up to 500 MHz. The MCU feature. This kit is designed for a wide range of applications, thanks to...

Sweden-based consumer electronics company Solder Party has just released two new RP2350 Compact Boards named the RP2350 Stamp, and RP2350 Stamp XL. The company has also released a carrier board that can be configured with either the RP2350 Stamp or the RP2350 Stamp XL. As the RP2350...

Banana Pi BPI-Centi-S3 is an ESP-32 S3-powered dev board with a 1.9-inch color TFT display, a rotary encoder, and a WS2812B NeoPixcel LED. GPIO and much more. These features make this board similar to the LILYGO T-Panel, LILYGO T4 S3, T-Display-S3-Long, and other display products that...